Aerotek Hiring for Machinist-3 Axis, 4 Axis at Wichita, Kansas Full Time

Description:

CNC Operator

Summary of Position

The CNC Operator is responsible for the timely and accurate production of metallic machined parts per the specifications and requirements of the shop traveler. The CNC Operator is also responsible for error-free processing of each order, and for completing the necessary paperwork and computer data entries associated with the CNC Production Process.

Responsibilities and Duties

As a minimum, the following is a basic description of typical duties and responsibilities expected of the CNC Operator. These duties are not exhaustive and are subject to change as the needs of the organization require.

● Operate, maintain, clean, setup, load, and unload the CNC Router

● Effectively and efficiently carry out production process:

o Receive order from Production Planner

o Allocate, pull, and load material

o Set up machine and run job

o Inspect products

o Clean, label, and stage finished parts

o Offload scrap or stock and return any materials as needed

o Process job though the system and maintain an organized, clean work area

o Verify quality to ensure the product meets the customer’s specifications

● Regularly clean and maintain equipment and machinery

● Program and troubleshoot CNC Router functions

● Understand Sunshine Metals’ objectives and mission

● Practice a willingness to learn production and distribution methodology

● Adhere to all Sunshine Metals’ safety rules, regulations, quality standards and procedures

● Keep immediate work area clean and organized throughout the day

● Cross-train other team members as assigned

Required Qualifications

● High school diploma or equivalent

● Valid Driver’s License

● Two or more years of machine operating experience

● Intermediate or Higher CNC operation experience

● Good reading and math skills

● Good organizational, problem solving, and time management skills

● Good written and oral communication skills

● Computer skills

● Ability to measure using different tools

● Ability to work independently on assigned tasks as well as to accept direction

● Strong work ethic; self-motivated

● Operate with high integrity, maintaining positive relations with co-workers, customers, and suppliers

Preferred Qualifications

● Coursework in metalworking, blueprint reading, drafting and math

● Two years machine operating experience

● One or more years of CNC router operation experience

● Mastercam experience

Physical Requirements

Physical demands:

● Sitting—Rarely

● Standing—More than ¾ of the time

● Use of hands or fingers to handle or feel—Over ¾ of the time

● Reach with hands or arms—Over ¾ of the time

● Kneeling/Crawling/Twisting/Balancing—Over ½ of the time

● Bending/Climbing—Over ½ of the time

● Talk or hear—Over ¾ of the time

● Close vision (clear vision at 36 inches or less)

Weights to be lifted:

● Up to 50 pounds—Over ¾ of the time

● Up to 75 pounds—Less than ¼ of the time

Weights to be pushed/pulled:

● Between 25-50 pounds—Over ¾ of the time

Benefits:

● 401(k)

● 401(k) matching

● Tuition Reimbursement

● Paid time off

● Health insurance

● Dental insurance

● Vision insurance

● Life insurance

Working Conditions

Good working conditions. Frequent visual/auditory attention to recognize needs for repair and service to facilities, machines, and vehicles.

Exposure to hazardous machinery, sharp tools, proximity to moving objects, noise, heat, humidity.

The physical demand and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

I understand that the above is intended to describe the essential job functions, the general supplemental functions, and the essential requirements for the performance of this job. It is not to be construed as an exhaustive statement of all supplemental requirements. Sunshine Metals, Inc. reserves the right to alter, add, modify, change, and cancel some or all parts of the above as it deems necessary according to its business needs.

CNC Operator

Summary of Position

The CNC Operator is responsible for the timely and accurate production of metallic machined parts per the specifications and requirements of the shop traveler. The CNC Operator is also responsible for error-free processing of each order, and for completing the necessary paperwork and computer data entries associated with the CNC Production Process.

Responsibilities and Duties

As a minimum, the following is a basic description of typical duties and responsibilities expected of the CNC Operator. These duties are not exhaustive and are subject to change as the needs of the organization require.

● Operate, maintain, clean, setup, load, and unload the CNC Router

● Effectively and efficiently carry out production process:

o Receive order from Production Planner

o Allocate, pull, and load material

o Set up machine and run job

o Inspect products

o Clean, label, and stage finished parts

o Offload scrap or stock and return any materials as needed

o Process job though the system and maintain an organized, clean work area

o Verify quality to ensure the product meets the customer’s specifications

● Regularly clean and maintain equipment and machinery

● Program and troubleshoot CNC Router functions

● Understand Sunshine Metals’ objectives and mission

● Practice a willingness to learn production and distribution methodology

● Adhere to all Sunshine Metals’ safety rules, regulations, quality standards and procedures

● Keep immediate work area clean and organized throughout the day

● Cross-train other team members as assigned

Preferred Qualifications

● Coursework in metalworking, blueprint reading, drafting and math

● Two years machine operating experience

● One or more years of CNC router operation experience

● Mastercam experience

Physical Requirements

Physical demands:

● Sitting—Rarely

● Standing—More than ¾ of the time

● Use of hands or fingers to handle or feel—Over ¾ of the time

● Reach with hands or arms—Over ¾ of the time

● Kneeling/Crawling/Twisting/Balancing—Over ½ of the time

● Bending/Climbing—Over ½ of the time

● Talk or hear—Over ¾ of the time

● Close vision (clear vision at 36 inches or less)

Weights to be lifted:

● Up to 50 pounds—Over ¾ of the time

● Up to 75 pounds—Less than ¼ of the time

Weights to be pushed/pulled:

● Between 25-50 pounds—Over ¾ of the time

Working Conditions

Good working conditions. Frequent visual/auditory attention to recognize needs for repair and service to facilities, machines, and vehicles.

Exposure to hazardous machinery, sharp tools, proximity to moving objects, noise, heat, humidity.

The physical demand and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

I understand that the above is intended to describe the essential job functions, the general supplemental functions, and the essential requirements for the performance of this job. It is not to be construed as an exhaustive statement of all supplemental requirements. Sunshine Metals, Inc. reserves the right to alter, add, modify, change, and cancel some or all parts of the above as it deems necessary according to its business needs.

-They will be working in a non-climate controlled environment cutting metals down to order specifications. The metals in the shop are mostly aviation grade (2,000 and 7,000) but they also have a small presence of marine (5,000).

-all candidates must possess 6+ months of mfg. and CNC Mills Machining and CNC Router experience. They must possess mfg. experience and running a machine understanding how to perform set-ups at the machine utilizing Fanuc and Haas Controls on 3 axis machines.

Skills:

Blueprints, Hyundai, Haas, 3 axis, 4 Axis, Fanuc Controls, Mazak, Micrometers, Calipers, Height Gauges, CNC Router, Mills, Fanuc, CNC mill, Micrometer, CNC machine

Top Skills Details:

Blueprints,Hyundai,Haas,3 axis,4 Axis, Fanuc Controls, Mazak, Micrometers, Calipers, Height Gauges, CNC Router, Mills

Additional Skills & Qualifications:

-Must have 6 months+ years minimum of 3 AXIS CNC Mills and CNC Router Experience.

-Must have 6 + months years minimum of Fanuc Controls Experience in operation of CNC Mills or Router Machines.

Experience Level:

Intermediate Level

About Aerotek:

We know that a company’s success starts with its employees. We also know that an individual’s success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek’s people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek’s 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.