Summary This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Responsibilities Serve as an Energy Program Manager for the United States Army Garrison, Fort Hamilton. Direct, administer, and perform professional engineering work concerned with energy management plans, conservation operations, and utility related matters throughout the Installation. Manage and implement the Garrison Energy Program with the goal of developing local policy and directives to reduce energy cost and to support stewardship of resources, readiness, and sustainability. Perform cost analysis adjustments if necessary, to ensure all readings, quantities used and cost amounts charged are accurate. Plan and coordinate work on energy and utilities related matters with other engineers and subordinate personnel. Conduct studies in research, data management, trend analysis, and special projects in all phases of the Garrison?s energy management program. Requirements Conditions of Employment Qualifications Who May Apply: US Citizens This is an interdisciplinary position which may be filled under any of the following titles and occupational series, depending on the qualifications of the applicant and needs of the agency: –Civil Engineer, 0810; –Environmental Engineer, 0819; –Mechanical Engineer, 0830; or –Electrical Engineer, 0850 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer, Environmental Engineer, Mechanical Engineer, or Electrical Engineer: A. Degree: Bachelor’s degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR- B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board’s eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum – Successful completion of a curriculum leading to a bachelor’s degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-11: Specialized Experience: One year of specialized experience which includes 1) assisting with coordinating and/or conducting reviews of energy related designs and/or construction projects; and 2) identifying and/or recommending methods to reduce an organization’s energy consumption. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). -OR- Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study]. -OR- Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12: Specialized Experience: One year of specialized experience which includes 1) coordinating and/or conducting reviews of energy related designs and/or construction projects; 2) assisting in designing and/or developing the layout and/or construction of energy conservation projects for buildings and/or utilities; 3) identifying and/or recommending methods to reduce an organization’s energy consumption; and 4) resolving energy management, conservation operations, and/or utilities related issues. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-[insert 11 or above]). Some federal jobs allow you to substitute your education for the required experience in order to qualify. At this grade level, you must meet the qualification requirement using experience alone–no substitution of education for experience is permitted. Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct Deposit of Pay is required. This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a Career Program (CP) 18 – Engineers and Scientists (Construction) position. This position may be filled at the GS-11 or GS-12. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. This position is not eligible for regular and recurring telework. This position is eligible for situational telework only, including emergency and OPM prescribed “unscheduled telework”. Situational telework is approved on a case-by-case basis, where the hours worked were not part of a previously approved, ongoing, and regular telework schedule. Situational telework is sometimes also referred to as episodic, intermittent, unscheduled, or ad-hoc telework. Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.
Description/Comment: The ESB team works with middleware developing apis and orchestration between multiple IT platforms. This role will be a...
Apply For This JobView, Inc. (NASDAQ: VIEW) is on a mission to transform buildings to improve human health and address climate change. We...
Apply For This JobJob Description: Kickstart your career in healthcare at ScribeAmerica by joining physicians and providers on the front line of the...
Apply For This Jobbr{display:none;}.css-58vpdc ul > li{margin-left:0;}.css-58vpdc li{padding:0;}]]> We are a Home Health Service Agency providing quality healthcare to the community. At our...
Apply For This JobThis position is located in Morganton, NC. The Cardiac Cath Lab Registered Nurse is responsible for assisting the cardiologist in...
Apply For This Jobbr{display:none;}.css-58vpdc ul > li{margin-left:0;}.css-58vpdc li{padding:0;}]]> Gwinnett/Walton Habitat for Humanity (Lawrenceville, Georgia) is seeking a full-time (32 hours/week) Receptionist/Office Assistant to...
Apply For This Job